Place of Origin:
Shenzhen, China
Brand Name:
ZEROONE-Control
Certification:
CE ROHS
Model Number:
PC86
Document:
| Stepper Motor Model | Flange (mm) | Torque (N.m) | Current (A) | Features and Applications | Matching Driver |
|---|---|---|---|---|---|
| NEMA 23 | 57 | 0.6-3.2 | 1.0A-4.0A | Suitable for small and medium-sized CNC equipment | PC86 Closed-loop |
| NEMA 24 | 60 | 1.5-4.0 | 2.0A-5.0A | Suitable for small to medium-sized CNC equipment, with slightly higher torque than NEMA23 | PC86 Closed-loop |
| NEMA 34 | 86 | 3.0-12.0 | 3.0A-8.0A | Suitable for heavy-load, high-rigidity applications | PC86 Closed-loop |
| NEMA 42 | 110 | 10.0-30.0 | 5.0A-15.0A | Suitable for large machine tools and heavy-duty conveyor lines | PC86 Closed-loop |
| Pulse/rev | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Default | On | On | On | On |
| 800 | Off | On | On | On |
| 1600 | On | Off | On | On |
| 3200 | Off | Off | On | On |
| 6400 | On | On | Off | On |
| 12800 | Off | On | Off | On |
| 25600 | On | Off | Off | On |
| 51200 | Off | Off | Off | On |
| 1000 | On | On | On | Off |
| 2000 | Off | On | On | Off |
| 4000 | On | Off | On | Off |
| 5000 | Off | Off | On | Off |
| 8000 | On | On | Off | Off |
| 10000 | Off | On | Off | Off |
| 20000 | On | Off | Off | Off |
| 40000 | Off | Off | Off | Off |
| Motor | SW7 | SW8 |
|---|---|---|
| 60-30 | ON | ON |
| 86-45 | OFF | ON |
| 86-85 | ON | OFF |
| 86-120 | OFF | OFF |
| Phenomenon | Potential Issues | Countermeasure |
|---|---|---|
| The motor is not turning | Power light is not on, motor shaft force, subdivision too small, drive protection, enable signal low, no response to control signal, motor circuit open, voltage too high or too low, motor or driver damaged | Check power supply circuit, increase signal current to 7-16mA, select correct subdivision, power on again, pull up or disconnect enable signal, check power connection, check and connect motor circuit, check power supply, replace motor or driver |
| Location is inaccurate | Signal interference, improper shielded ground connection, motor circuit open, subsection error | Suppress interference, ensure reliable grounding, check and connect motor circuit, set correct subdivision |
| Motor stall during acceleration | Acceleration time too short, motor torque too low, low voltage | Prolong acceleration time, select high-torque motor, appropriately increase voltage |
Send your inquiry directly to us
