Home
Products
Open-loop Stepper system
2-phase open-loop stepper drivers
3-phase open-loop stepper drivers
5-phase open-loop stepper drivers
Switch signl IO open-loop stepper drivers
Multi-axis stepper drivers
Open-loop stepper motors
Closed-loop Stepper system
2-phase Closed-loop stepper drivers
3-phase Closed-loop stepper drivers
5-phase Closed-loop stepper drivers
Closed-loop stepper motors
Bus-type stepper drivers
EtherCAT Bus stepper drivers
EC42 Ethercat Stepper Driver
EC57 Ethercat Stepper Driver
EC86 Ethercat Stepper Driver
Modbus RTU Bus stepper drivers
CANopen Bus stepper drivers
Low-voltage Servo System
EtherCAT bus low-voltage servo drivers
CANopen bus low-voltage servo drivers
Pulse-controlled low-voltage servo drivers
All-in-one universal low-voltage servo
Low-voltage servo motors
Factory-customized products
Type C Debugger
Integrated stepper motors
All-in-one universal low-voltage servo
High power density low voltage servo drives
Dedicated low-voltage servo drivers
Sensorless brushless drivers
Videos
About Us
Company Profile
Factory Tour
Quality Control
Contact Us
events
news
Cases
english
Home > Products > Open-loop Stepper system >
60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation

60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation

4.0N.m Holding Torque Stepper Motor Kit

Up to 3000 RPM DM542 Driver

2-phase Hybrid 60CM40 Stepper Motor

Place of Origin:

China

Brand Name:

ZEROONE-Control

Certification:

CE ROHS

Model Number:

60CM40 Stepper Motor with DM542 driver

Document:

P542（DM542）DSP Stepper ...on.pdf

Contact Us
Request A Quote
60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation
60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation
Product Details
Control Type:
Open-loop
Stepangle:
1.8 Degrees (typical)
Holding Torque:
4.0N.m
Motor Type:
Stepper Motor
Phase:
2-phase
Current:
1.0A To 4.2A
Maxspeed:
Up To 3000 RPM
Operatingtemperature:
-20°C To 50°C
Drivemethod:
Pulse And Direction
Mounting Type:
Flange Mount
Highlight:

4.0N.m Holding Torque Stepper Motor Kit

,

Up to 3000 RPM DM542 Driver

,

2-phase Hybrid 60CM40 Stepper Motor

Payment & Shipping Terms
Minimum Order Quantity
1 set
Price
US$30/pcs
Packaging Details
Carton
Delivery Time
2-7 days
Payment Terms
L/C,D/A,D/P,T/T,Western Union
Supply Ability
200 sets/ day
RELATED PRODUCTS
Good price 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation online Video

60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation

Get Best Price
Good price DM860C 7.2A Stepper Motor Driver with NEMA34 Stepper Motor Kit With 4.5Nm Holding Torque 6A 2-phase Open-loop For CNC Machines online

DM860C 7.2A Stepper Motor Driver with NEMA34 Stepper Motor Kit With 4.5Nm Holding Torque 6A 2-phase Open-loop For CNC Machines

Get Best Price
Good price 5.6A DC 20V-80V 2 Phase Open Loop DM556-IO P2405D Stepper Motor Driver For 57 Nema23 Stepper Motor Controller online Video

5.6A DC 20V-80V 2 Phase Open Loop DM556-IO P2405D Stepper Motor Driver For 57 Nema23 Stepper Motor Controller

Get Best Price
Good price P860A DM860A Stepper Motor Driver with 8.4A Peak Current DC(24-110V) AC(18-80V) Voltage Range and 51200ppr Microstepping for Nema34 Motors online Video

P860A DM860A Stepper Motor Driver with 8.4A Peak Current DC(24-110V) AC(18-80V) Voltage Range and 51200ppr Microstepping for Nema34 Motors

Get Best Price
CONTACT US
+86 15986629397
yituoyou@gmail.com
Contact Now
Product Description
60CM40 Stepper Motor Kit with DM542 Driver
Complete stepper motor solution featuring the 60CM40 hybrid stepper motor paired with the DM542 digital driver, designed for medium-torque automation applications.
60CM40 Stepper Motor Specifications
Motor Type: 2-phase hybrid stepper motor with 60mm flange (NEMA24)
  • Step Angle: 1.8° (200 steps per revolution)
  • Accuracy: ±5% no-load positioning
  • Holding Torque: 2.0-4.0N·m
  • Rated Current: 4.0A per phase
  • Insulation Class: Class B (130℃)
  • Lead Wires: 4/6/8 lead options available
  • Shaft Diameter: 8mm
  • Flange Size: 60mm
  • Length: Approximately 100mm
DM542 Driver Specifications
Driver Type: 2-phase full-digital stepper driver
  • Input Voltage: DC18-50V (24-48V recommended)
  • Output Current: 1.0-4.2A per phase (8 adjustable gears)
  • Maximum Pulse Response: 200KHz
  • Microstepping: 16 gears (200-25600 steps per revolution)
  • Control Modes: Pulse/direction or CW/CCW dual-pulse
  • Protection Features: Photoelectric isolation, overvoltage/undervoltage/overcurrent/short-circuit protection
  • Additional Functions: Automatic half-current and offline functions
Compatibility Guidelines
  • Current Matching: Set DM542 output current to 4.0A to match motor rating
  • Voltage Selection: Use DC36-48V for optimal high-speed torque and response
  • Microstepping: 16-64 microsteps recommended for balanced performance
  • Signal Connection: Connect PUL/DIR interface to PLC/motion controller
  • Protection: Enable half-current and full protection functions
DM542 DIP Switch Settings for 60CM40 Motor
Function Switch Position Setting Result
Current Setting SA5=ON, SA6=ON, SA7=OFF, SA8=OFF 4.0A per phase Matches motor rated current
Microstepping (Regular) SA1=OFF, SA2=OFF, SA3=ON, SA4=OFF 16 microsteps 3200 steps per revolution
Microstepping (High Precision) SA1=ON, SA2=OFF, SA3=ON, SA4=OFF 64 microsteps 12800 steps per revolution
Wiring Configuration
Motor Winding Connection (4-wire model):
DM542 Terminal 60CM40 Wire Color
A+ Red
A- Black
B+ Blue
B- Green
Control Signal Wiring (PUL/DIR):
DM542 Terminal Connection
PUL+ Pulse signal output
PUL- Pulse signal ground
DIR+ Direction signal output
DIR- Direction signal ground
ENA+, ENA- Enable signal (optional)
Power Supply Connection:
DM542 Terminal Connection
DC+ Positive pole of 24-48V DC power supply
DC- Negative pole of DC power supply
Note: For reverse motor rotation, swap the two wires of Group A (red ↔ black) or Group B (blue ↔ green). Use 36V DC power supply for optimal torque and stability.
Product Images
60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 0 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 1 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 2 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 3 60CM40 Stepper Motor Kit with DM542 Driver - 4.0N.m Holding Torque, 2-phase Hybrid, Up to 3000 RPM for CNC and Automation 4
Tags：

Open Loop 2 Phase Pulse Stepper Motor Driver

DC12-40V P430 Driver

0.14-3A Current Nema17 Motor Driver

Related Products
Integrated 57-76mm NEMA 23 Closed-Loop Stepper Motor System with 2.2Nm Holding Torque and High Precision Control Video

Integrated 57-76mm NEMA 23 Closed-Loop Stepper Motor System with 2.2Nm Holding Torque and High Precision Control

Get Best Price
DM860C 7.2A Stepper Motor Driver with NEMA34 Stepper Motor Kit With 4.5Nm Holding Torque 6A 2-phase Open-loop For CNC Machines

DM860C 7.2A Stepper Motor Driver with NEMA34 Stepper Motor Kit With 4.5Nm Holding Torque 6A 2-phase Open-loop For CNC Machines

Get Best Price
5.6A DC 20V-80V 2 Phase Open Loop DM556-IO P2405D Stepper Motor Driver For 57 Nema23 Stepper Motor Controller Video

5.6A DC 20V-80V 2 Phase Open Loop DM556-IO P2405D Stepper Motor Driver For 57 Nema23 Stepper Motor Controller

Get Best Price
P860A DM860A Stepper Motor Driver with 8.4A Peak Current DC(24-110V) AC(18-80V) Voltage Range and 51200ppr Microstepping for Nema34 Motors Video

P860A DM860A Stepper Motor Driver with 8.4A Peak Current DC(24-110V) AC(18-80V) Voltage Range and 51200ppr Microstepping for Nema34 Motors

Get Best Price
DM556 Stepper Motor Driver with 5.6A Peak Current DC20V-80V Voltage Range and 51200ppr Microstepping for Nema23 Motors Video

DM556 Stepper Motor Driver with 5.6A Peak Current DC20V-80V Voltage Range and 51200ppr Microstepping for Nema23 Motors

Get Best Price

Send your inquiry directly to us

Tel：86--15986629397
Email：yituoyou@gmail.com
wechat
About Us
Company Profile
Factory Tour
Quality Control
Sitemap
Events
news
Cases
Shenzhen Zero One Intelligent Control Co., Ltd.
We'll get back to you as soon as possible.
Privacy Policy China Good Quality Open-loop Stepper system Supplier. Copyright © 2025-2026 Shenzhen Zero One Intelligent Control Co., Ltd. . All Rights Reserved.